Restore All concentrate must be diluted before use.
Directions: Optimum dilution of this product is 1 part chemical to 4 parts water when applied down stream with a pressure washer. Used in a pump sprayer, mix 12 ounces of chemical to each 1 gallon of water. In hard water areas more chemical may be required. Pre-wet surface thoroughly before applying chemical to surface to be cleaned. This will allow for the chemical to work on the surface dirt and not be absorbed into a dry porous surface. Always test chemical in an out of the way area. When cleaning with ;pressure washer, set the metering valve at desired dilution rate and apply cleaning solution from the bottom up on a dry surface. Always detail clean from the bottom up and rinse from the top down. Do not use on polished aluminum. Do not use on delicate paint. Do not allow to dry on surfaces. Always rinse thoroughly.